Oceanic Dive Computer Pro Plus 2 Manuel d'utilisateur télécharger pdf (Page 30)

100

ATR

TO SET - HOUR FORMAT (while in the Surface Mode)

Factory set for 12 Hr (12: Am to 11: Pm), the Format can

also be set for 24 Hr (0: to 23: hours).

• Press Both buttons simultaneously, release when SET: 2

appears (4 seconds).

• Press and release the Left (Advance) button, the Units

screen appears with the set point flashing.

• Press the Left (Advance) button 1 more time.

• The graphic Hour appears with 12 (or 24) flashing

(Fig. 25).

• Press and release the Right (Select) button to toggle

between 12 and 24.

• Press the Left (Advance) button to accept the setting and

advance to Set Hour, or press and hold Both buttons for

2 seconds to revert to Surface Mode.

Fig. 25 - Set Hour Format

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 99 100

Pro Plus 2 1
CONTENTS 3
CONTENTS (continued) 4
PRO PLUS 2 6
FEATURES and DISPLAYS 7
Fig. 2 - TLBG 9
Fig. 3 - O2BG and VARI 10
Fig. 4 - VARI Values 10
Fig. 5 - ATRBG 11
Fig. 6 - Cylinder Pressure 12
Fig. 7 - Time and Temperature 13
Displays 13
Fig. 8 - Battery Indicator 16
Fig. 10 - FO2 set for AIR 18
Fig. 11 - FO2 set for 21% 19
Fig. 12 - FO2 Default ON 19
Fig. 13 - FO2 Default OFF 20
ACTIVATION and SETUP 21
Fig. 14 - Diagnostic Mode 22
Fig. 15 - Surface Mode 23
Fig. 16 - Surface Mode 23
(rinse and dry the unit) 23
Fig. 17 - Set Mode 1 24
Fig. 18 - Set Mode 2 24
Fig. 19 - Set FO2 25
Fig. 20 - FO2 set for 32% 25
Fig. 21 - Set Max Depth Alarm 26
Fig. 22 - Set Elapsed Dive 27
Time Alarm 27
Fig. 23 - PC Interface 28
Fig. 25 - Set Hour Format 30
Fig. 26 - Set Hour 31
Fig. 27 - Set Minute 31
Fig. 32 - Set Max TLBG Alarm 34
10 20 30 40 50 6005 35
Fig. 36 - Set Dive Time 38
Remaining Alarm 38
Fig. 37 - Maximum PO2 Alarm 39
Fig. 38 - Set FO2 50% Default 40
PLAN and DIVE MODES 45
Fig. 44 - Oxygen Control 47
Fig. 43 - Nitrogen Control 47
10 20 3005 49
Fig. 52 - No Deco #4 52
Fig. 51 - No Deco #3 52
Fig. 50 - No Deco #2 52
Fig. 53 - No Deco Secondary 53
Deco Mode icon 54
Fig. 56 - Deco #1 55
10 20 30 40 5005 59
Gauge Mode (underwater) 60
Responsible 61
Fig. 66 - PO2 Warning 62
Fig. 67 - PO2 Alarm 62
Fig. 68 - High O2 63
(Air Time Remaining) 64
POST DIVE MODES 65
Fig. 71 - Transition Period 66
Fig. 74 - Adjusted NDLs 68
Fig. 75 - Time to Fly 69
Fig. 76 - Time to Desaturate 69
Fig. 80 - Surface Mode 72
Fig. 79 - Log (Oxygen Data) 72
Fig. 82 - Desaturation Mode 73
(activation contacts wet) 73
Fig. 81 - Fly Mode 73
(Activation Contacts Wet) 73
Fig. 83 - PC Interface 74
SIMULATOR (DEMO) MODE 75
Fig. 85 - Set Demo Gauge 76
Fig. 84 - Simulator Mode 76
Fig. 88 - Set Demo FO2 78
Fig. 89 - Demo Dive Mode 78
Fig. 91 - Time Acceleration 79
Fig. 90 - Dive Mode Setup 79
Fig. 92 - Ascent set at 1 fps 80
Fig. 94 - Demo Surface Mode 81
RESPONSIBLE DIVER 82
Fig. 95 - Case Back 84
Fig. 96 - Battery Hatch 87
Fig. 99 - Hatch Installation 89
SPECIFICATIONS 90
SPECIFICATIONS (CONTINUED) 91
OCEANIC WORLD WIDE 96
INSPECTION / SERVICE RECORD 97
RESET FEATURE 99
RESET PROCEDURE 99

Commentaires sur ces manuels

Pas de commentaire

Oceanic Dive Computer Pro Plus 2 Manuel d'utilisateur Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Ordinateurs Oceanic Dive Computer Pro Plus 2